NFLUENCE OF NITROGEN-, PHOSPHORUS-, METAL-CONTAINING OLIGOMERS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF COMPOSITE MATERIALS BASED ON POLYETHYLENE
Article Sidebar
Main Article Content
Abstract
The article studied the physical and mechanical properties of filled polyethylene and polyamide compositions, the determination of the melt flow index by vizkizometry methods, the determination of bending strength by the methods of two-bearing bending, the determination of Charpy impact strength.
Downloads
Article Details
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
References
UmarovSh.Sh., Tojiyev P.J., TuraevKh.Kh., Jalilov A.T. Structure and properties of polymers filled with metal oxides // Tashkent : Uzbek chemical journal, 2021, №4, bet -pр.18-24(in Russian)
DusanovR.Kh., TozhievP.Zh., TuraevKh.Kh., Jalilov A.T. Structure and properties of polyamide-6 filled with vermiculite Universum: chemistry and biology: electronic scientific journal. -2020.-№10(76). pp. 54-57(in Russian)
GOST 11645-73. Plastics. Method for determining the melt flow rate of thermoplastics. Enter. from 01.01.1975. M .: p. 12(in Russian)
GOST 9550-81 (Plastics. Methods for determining the modulus of elasticity in tension, compression and bending) Vved. from 26.08.1981 p. 15(in Russian)
GOST 4647-80. Plastics. Method for determining the Charpy impact strength. Enter. from 01.06.1981, S.27(in Russian)
GOST 11262-80. Plastics. Tensile test method. Enter. from 01.12.1980, P.16(in Russian)
GOST 4651-2014. Plastics. Compression test method. Enter. from 01.03.2015. M .: Standartinform, 2014, S.20(in Russian)
Chukov N.A. Composite materials based on polypropylene and nanoscale fillers: dissertation for a candidate of technical sciences: - Nalchik, 2011. - 110 p .: ill. RSL OD, 61 11-5 / 1845(in Russian)
Henini M., Quantum Dot Nanostructures // Materials Today. - 2002. - V. 48. –P. 140-142.(in English)
Kiviranta L., Kumpulainen S. Quality Control and Characterriation of
Bentonite Materials // PosivaOY.– 2011. - P.102. (in English)
Egorova O.V. Directed regulation of the structure and properties of polyethylene filled with dispersed fillers / OV Egorova, Yu.A. Kadykova, S.E. Artemenko // Plastic mass. - 2012. - No. 4. - S. 57-59. (in Russian)
Tojiev P.J., Normurodov B.A., TuraevKh.Kh., Nurkulov F.N. *, Jalilov A.T. * Study of the physical and mechanical properties of highly filled polyethylene compositions // UNIVERSUM: Chemical technology: electronic scientific journal 2018 No. 2 (47). (in Russian)
Mozzhukhin V.B. Influence of technological equipment and technology for obtaining highly filled compositions based on polyolefins on their physical and mechanical properties / VB Mozzhukhin et al. // Plastics. - 2013. - No. 1. - P. 54–56.
B.A. Normurodov, P.J. Tojiev, Kh.Kh. Turaev, A.T. Djalilov, F.N. Nurkulov Study of physical and mechanical properties of basalt-containing polyethylene compositions // Tashkent: Composite materials-2017.-№ 4.-С.10-12(in Russian)
B.A. Normurodov, P.J. Tojiev, Kh.Kh. Turaev, A.T. Djalilov Synthesis and IR-spectroscopic study of sulfur-containing oligomer// UNIVERSUM: Chemistry and Biology: electronic scientific journal 2018 No. 2 (44). (in Russian)
Kryzhanovsky, V.K. Production of products from polymer materials textbook / VK Kryzhanovsky and [others]. - SPb. : Profession, 2014 .-- 592 p. (in Russian)
Bredikhin P.A., KadykovaYu.A. Investigation of the properties of PCM filled with dispersed basalt // V International student electronic scientific conference "Student scientific forum" - 2013. (in Russian)
Kerber M.L., Bukanov A.M., Wolfson S.I., GorbunovaI.Yu., Kandyrin L.B., Sirota A.G., Sheryshev M.A. Physical and chemical processes in the processing of polymers. - SPb.: Nauchnyeosnovyitekhnologii, 2013.
Guseva M.A., Structure and physical-mechanical properties of nanocomposites on the basis of non-polar polymers and layered silicates: Autoref. Dis. Cand. phys.-math. science Moscow: INXS RAN, 2004.
Kompozitynaosnovepolyolefinov / Pod ed. D. Nwabunmy, T. Cue. Per. s engl..-SPb.: NOT, 2014.
Osama Abdulkarim Al KheloMaterialynaosnove polypropylene with adjustable properties. Dissertation. sugar tech. science Moscow: RXTU, 20014.
ShitovD.Yu., Kravchenko T.P., Osipchik V.S., Rakov E.G. Kompozitnyematerialynaosnovepolypropylenea s korbonnyminanopolnitelyami // Plasticheskie massy, No. 2, 2013. S. 29-33.