THE REINFORCEMENT OF COMPOSITE MATERIALS WITH NATURAL ORGANIC FIBERS

G.P.  Genjemuratova; G.K. Shambilova; S.A.  Bayniyazova

PDF

Published: 2023-05-20

Keywords:

material, composite materials, fibers, reinforcement, metal, matrix, carbon fibers, oxidation.

Genjemuratova G.P.

Karakalpak State University

Shambilova G.K.

K.f.d., Professor of Atyrau Oil and Gas University named after Safi Otabaev,

Bayniyazova S.A.

1st year master student of chemical technology of organic substances

Abstract

Composite materials are materials that are made of two or more components and have a definite boundary between them. Fiber-reinforced metals are composite materials with reinforcement in the form of fibers with a metal matrix. Metals reinforced with fibers are used in aviation and rocket technology. Therefore, this article analyzes composite materials reinforced with organic fibers.

Downloads

Download data is not yet available.

Issue

Vol. 3 No. 5 (2023): International Bulletin of Applied Science and Technology

Section

Articles

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

THE REINFORCEMENT OF COMPOSITE MATERIALS WITH NATURAL ORGANIC FIBERS. (2023). International Bulletin of Applied Science and Technology, 3(5), 738-741. https://researchcitations.com/index.php/ibast/article/view/1563

References

Nurmurodov S.D., Rasulov A.X., Baxodirov Q.G‘. Materialshunoslik va konstruksion materiallar texnologiyasi. Darslik. - Toshkent, «Fan va texnologiya» nashriyoti, 2015

Nurmurodov S.D., Ziyamuxamedova U.A. Metallar texnologiyasi. Darslik-Toshkent, 2017

Norxudjaev F.R. Materialshunoslik. Darslik. - Toshkent.: Fan va texnologiyalar. 2014

Sadikova Adalat Maratovna. (2023). PEDAGOGICAL EXPERIENCE AND THE QUALITY OF TEACHER EDUCATION INTERNATIONAL EXPERIENCES AS A CONTRIBUTOR. INTERNATIONAL BULLETIN OF APPLIED SCIENCE AND TECHNOLOGY, 3(2), 163–166.

S.D. Nurmurodov, A.X. Rasulov, A.A. Allanazarov. Mashinasozlik materiallari. - Toshkent.: 2020

Ziyamuxamedova U.A., Nurmurodov S.D., Rasulov A.X. Metallshunoslik. Darslik. - Toshkent, «Fan va texnologiya» nashriyoti, 2018

Similar Articles

Nilufar Tursunova, Normurot Fayzullaev, Noryigit Musulmonov, A NEW METHOD OF OBTAINING NANOCARBON AND HYDROGEN FROM THE PROPANE-BUTANE FRACTION , International Bulletin of Applied Science and Technology: Vol. 2 No. 11 (2022): International Bulletin of Applied Science and Technology
Kurbanov Zavkiddinzhon Khamidulloevich, Rasulova Nargiza Botirkulovna, Ortikulov Davron, TECHNOLOGY OF APPLICATION OF GEOSYNTHETIC MATERIAL IN PRODUCTION AND CONSTRUCTION , International Bulletin of Applied Science and Technology: Vol. 3 No. 3 (2023): International Bulletin of Applied Science and Technology
Mirzajonova Barno, Kambarova Manzura , NATURAL AND MAN-MADE FIBERS , International Bulletin of Applied Science and Technology: Vol. 5 No. 4 (2025): International Bulletin of Applied Science and Technology
Panji Tojiev, Hayit Turaev , Gayrat Nuraliev , INFLUENCE OF MODIFIERS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF COMPOSITE MATERIALS BASED ON POLYAMIDE-6 , International Bulletin of Applied Science and Technology: Vol. 2 No. 10 (2022): International Bulletin of Applied Science and Technology
Turdialiyev Umid Mukhtaraliyevich, Xasanov Bobirmirzo Maxmudali ugli, Djumabayev Alijon Bakishevich, TO STUDY THE DISTRIBUTION OF THE DENSITY OF THE RADIANT ENERGY FLUX IN THE FOCAL PLANE OF THE PARABOLOID OF CYLINDRICAL CONCENTRATORS , International Bulletin of Applied Science and Technology: Vol. 3 No. 10 (2023): International Bulletin of Applied Science and Technology
Saburov Kh.M., Khairullaev R.S., Gulmatov A.B., Dzhumaboeva Sh.N., METHODS FOR STABILIZING SHIFTING SANDS , International Bulletin of Applied Science and Technology: Vol. 5 No. 5 (2025): International Bulletin of Applied Science and Technology
P.J. Tojiev , X.X. Turaev , G.T. Nuraliyev , A.T. Djalilov , STUDY OF PHYSICAL-MECHANICAL AND THERMAL PROPERTIES OF FILLED POLYVINYL CHLORIDE , International Bulletin of Applied Science and Technology: Vol. 2 No. 10 (2022): International Bulletin of Applied Science and Technology
Shokhrukh Shukhratovich Akhmadaliev, Khasanov Kamoliddin Akmal ugli, Saydumarov Botir Muradovich, DEVELOPMENT OF AN UPPER-BOUND METHOD FOR EXTRUSION STAMPING OF A CONICAL FLANGE , International Bulletin of Applied Science and Technology: Vol. 5 No. 6 (2025): International Bulletin of Applied Science and Technology
L.O. Olimov, I.I.Anarboyev, ENERGY CONVERTER BASED ON NANO-STRUCTURED SI , International Bulletin of Applied Science and Technology: Vol. 3 No. 6 (2023): International Bulletin of Applied Science and Technology
Bakhodir Polatov, OBTAINING A WEAR-RESISTANT COATING USING FLAME SPRAYING FOLLOWED BY MELTING , International Bulletin of Applied Science and Technology: Vol. 4 No. 8 (2024): International Bulletin of Applied Science and Technology

You may also start an advanced similarity search for this article.

Article Sidebar

Main Article Content