MAIN UNITS OF HEAT EXCHANGERS
Keywords:
heat exchanger, flow rate, temperature difference, temperature change, flow types, fouling.Abstract
In this article, you will learn about the main units and features of heat exchangers. In addition, depending on the problem, you can get information about the most important quantities, such as construction design methods, flow types, logarithmic values, heat transfer coefficient, heat transfer surface.
Downloads
References
Taborek J., 1983a Heat Exchanger Design Handbook, Part 3, 3.1.3 Introduction to Heat Exchanger Design, Logic of the Design Process. VDI-Verlag, Hemisphere Publishing Ltd, 1983.
Shah R.K., Sekuliü D.P., Fundamentals of Heat Exchanger Design and Manufacture, 2003, xyz Inc., xth Ed
Sarcomaa Pertti, Design methods and thermomechanical measurements of heat exchangers. LTKK, Training handout C-65, Lappeenranta, 1994.
Gosta Bylund. Tetra pak. Dairy processing HANDBOOK. Sweden. Lund. Tetra Pak processing Systems publishing 1995.
Kuppan.T Heat Exchanger Design Handbook, Marcel Dekker, NC, New York-2000.
Gupta, J.P., Fundametals of Heat exchangers and pressure vessel technology, Hemisphere, Washington, DC, 1986
Saunders, E.A.D., Heat exchangers – selection, Design and Construction, Wiley, New York, 1988
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in this journal are licensed under the Creative Commons Attribution 4.0 International License (CC-BY 4.0). Under this license:
- Share: Copy and redistribute the material in any medium or format
- Adapt: Remix, transform, and build upon the material for any purpose, including commercially
Attribution required: You must give appropriate credit, provide a link to the license, and indicate if changes were made.
License URL: https://creativecommons.org/licenses/by/4.0/
Authors retain copyright of their work while granting the journal first publication rights.
