DEVELOPMENT OF A LOW-COST BIO-3D PRINTER FOR SCALING THE APPLICATION OF TISSUE AND SCAFFOLD BIOPRINTING TECHNOLOGIES IN RESEARCH AND DEVELOPMENT ACTIVITIES IN UZBEKISTAN
DOI:
https://doi.org/10.37547/Abstract
Three-dimensional (3D) bioprinting has developed over the last ten years into one of the most promising technological methods in tissue engineering, regenerative medicine, and pharmaceutical testing. The ability to make biologically functional structures by carefully placing cells and biomaterials opens up new ways to solve important global problems, such as organ shortages and the limits of traditional in vitro models. However, bioprinting technologies are still not widely used because commercial systems are often too expensive and complicated for institutions in developing countries to use.
Downloads
References
1.Murphy SV, Atala A. 3D bioprinting of tissues and organs. Nature Biotechnology. 2014. https://doi.org/10.1038/nbt.2958
2.Ozbolat IT. Bioprinting scale-up tissue engineering. Trends in Biotechnology. 2015. https://doi.org/10.1016/j.tibtech.2015.04.005
3.Derby B. Printing and prototyping biomaterials. Science. 2012. https://doi.org/10.1126/science.1226340
4.Mandrycky C et al. 3D bioprinting for engineering complex tissues. Biotechnology Advances. 2016. https://doi.org/10.1016/j.biotechadv.2015.12.011
5.Bishop ES et al. 3D bioprinting technologies in tissue engineering. Genes & Diseases. 2017. https://doi.org/10.1016/j.gendis.2017.10.002
6.Pearce JM. Building research equipment with free open-source hardware. Science. 2012. https://doi.org/10.1126/science.1228183
7.Baden T et al. Open Labware. PLoS Biology. 2015. https://doi.org/10.1371/journal.pbio.1002086
8.Ozbolat IT, Hospodiuk M. Current advances in extrusion-based bioprinting. Biomaterils. 2016. https://doi.org/10.1016/j.biomaterials.2016.01.067
9.Suntornnond R et al. Microextrusion printing. Biofabrication. 2017. https://doi.org/10.1088/1758-5090/aa76c7
10.Hospodiuk M et al. The bioink: materials in bioprinting. Biotechnology Advances. 2017. https://doi.org/10.1016/j.biotechadv.2017.01.006
11.Tashman JW et al. Open-source bioprinter. Scientific Reports. 2022. https://doi.org/10.1038/s41598-022-26809-4
12.Olate-Moya F et al. Low-cost bioprinter. Bioprinting. 2021. https://doi.org/10.1016/j.bprint.2021.e00146
13.Lee JM et al. Open-source syringe extruder. HardwareX. 2019. https://doi.org/10.1016/j.ohx.2019.e00063
14.Hinton TJ et al. Hybrid tissue printing. Science Advances. 2015. https://doi.org/10.1126/sciadv.1500758
15.Kolesky DB et al. 3D bioprinting vascularized tissue. PNAS. 2016. https://doi.org/10.1073/pnas.1521342113
16.Sanz-García A et al. Temperature control in bioprinting. Polymers. 2020. https://doi.org/10.3390/polym12102346
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in this journal are licensed under the Creative Commons Attribution 4.0 International License (CC-BY 4.0). Under this license:
- Share: Copy and redistribute the material in any medium or format
- Adapt: Remix, transform, and build upon the material for any purpose, including commercially
Attribution required: You must give appropriate credit, provide a link to the license, and indicate if changes were made.
License URL: https://creativecommons.org/licenses/by/4.0/
Authors retain copyright of their work while granting the journal first publication rights.
