Articles | Open Access |

DEPENDENCE OF CHANGES IN THE PROPERTIES OF MOTOR OILS ON THE OPERATING CONDITIONS OF THE ENGINE

Alimova Zebo Hamidullayevna , Candidate of Technical Sciences, Professor, Tashkent State Transport University, Uzbekistan
Ibrahimov Karimjon Ismailovich , Candidate of Technical Sciences, Professor, Tashkent State Transport University, Uzbekistan

Abstract

The purpose of this work is to study the performance characteristics of the M-10V2 engine oil used in diesel engines. During the operation of the controlled vehicles, tests of samples of fresh oil, working and spent with mileage recording were carried out. The main physical and chemical parameters of properties (viscosity, alkaline number, dispersing and stabilizing ability, moisture content, fuel, mechanical impurities, ash content, etc.) affecting the operational characteristics of the oil have been studied.

Keywords

engine oils, additives, oxidation, sedimentation, varnish deposits, carbonaceous particles.

References

Dzherikhov V.B. Automotive operational materials: textbook. St.Petersburg: SPGASU, 2009

Alimova Z. K., Makhamadjanov, M.I., &Magdiev, K. I. (2021). Research Of Anti-Corrosion Properties Of Engine Oils When The Engine Is Running. The American Journal of Agriculture and Biomedical Engineering, 3(11), 28-33.

Alimova, Z., Makhamadjanov, M. I., & Magdiev, K. (2022). The effect of changes in the viscosity parameters of engine oils on the operation of engine parts. Eurasian Journal of Academic Research, 2(10), 151-154.

Khamidullaevna, A. Z. (2022). Studies of anticorrosive properties motor oils and ways to improve. European International Journal of Multidisciplinary Research and Management Studies, 2(06), 6-12.

Alimova Zebo Kh, Abdurazzoqov Abduaziz A, & Yuldasheva Gulnora B. (2022). Improving the Anticorrosive Properties of Motor Oils by Adding Additives. Texas Journal of Engineering and Technology, 8, 16–19.

Alimova Zebo Xamidullayevna, & Niyazova Gulhayo Parpiyevna. (2022). Research of the mechanism of action of the protective properties of inhibited compositions. The American Journal of Engineering and Technology,4(02), 19–22.

Alimova Zebo Khamidullaevna. (2022). Investigation of changes in the quality of motor oils when operating engines. Innovative Technologica: Methodical Research Journal, 3(06), 119–122.

Khamidullaevna, A. Z., & Miraziz, I. (2022). Regularities of the mechanism of varnish formation on the surface of parts of internal combustion engines. Innovative Technologica: Methodical Research Journal, 3(6), 1-5.

Alimova, Z. (2018). The influence of the process off oxidation of engine oils on engine performance and improving antioxidant properties. Acta of Turin Polytechnic University in Tashkent, 8(1), 17.

Xamidullayevna, A. Z., & Parpiyevna, N. G. (2022). Research of the mechanism of action of the protective properties of inhibited compositions. The American Journal of Engineering and Technology, 4(02), 19-22.

Alimova, Z., Abdukhalilov, Н., Kholmirzayev, В., & Samatayev, Т. (2020). Ways to improve the performance of hydraulic oils for agricultural machinery. Industrial Technology and Engineering, 3(36), 17-22.

Khamidullaevna, A. Z., & Faxriddin, S. (2022). The aging process of motor oils during operation. European International Journal of Multidisciplinary Research and Management Studies, 2(06), 166-169.

Khamidullaevna, A. Z. (2022). Causes of changes in the viscosity parameters of motor oils during operation. Web of Scientist: International Scientific Research Journal, 3(10), 156-160.

Alimova Zebo Hamidullayevna, & Ibrahimov Karimjon Ismailovich. (2023). Causes of changes in the properties of motor oils in the high temperature zone of the engine. American Journal of Applied Science and Technology, 3(01), 1–5. https://doi.org/10.37547/ajast/ Volume03Issue01-01

Article Statistics

Downloads

Download data is not yet available.

Copyright License

Download Citations

How to Cite

DEPENDENCE OF CHANGES IN THE PROPERTIES OF MOTOR OILS ON THE OPERATING CONDITIONS OF THE ENGINE. (2023). International Bulletin of Applied Science and Technology, 3(4), 288-292. https://researchcitations.com/index.php/ibast/article/view/1024