CAD DASTURLARINI AVTOMOBILSOZLIKDA O‘RNI VA RIVOJLANISHI
DOI:
https://doi.org/10.37547/Keywords:
CAD, avtomobilsozlik, kompyuter yordamida loyihalash, 3D modellashtirish, CAE, CAM, PLM, virtual prototiplash, generativ dizayn, sun’iy intellekt, raqamli texnologiyalar.Abstract
Mazkur maqolada avtomobilsozlik sanoatida kompyuter yordamida loyihalash tizimlari — CAD (Computer-Aided Design) dasturlarining o‘rni va ahamiyati tahlil qilinadi. Unda CAD texnologiyalarining loyihalash jarayonini raqamlashtirish, tahlil va simulyatsiya imkoniyatlarini kengaytirish, virtual prototiplash orqali xarajat va vaqtni kamaytirish, shuningdek, ishlab chiqarish jarayonlarini avtomatlashtirishdagi roli yoritib berilgan. Shuningdek, CAD texnologiyalarining tarixiy rivojlanish bosqichlari hamda zamonaviy yo‘nalishlari, jumladan sun’iy intellekt, bulutli texnologiyalar va VR/AR tizimlari bilan integratsiyasi ko‘rib chiqiladi. Tadqiqot natijalari CAD tizimlarining avtomobilsozlikda samaradorlikni oshirish, mahsulot sifati va xavfsizligini ta’minlashdagi muhim o‘rnini ko‘rsatadi.
Downloads
References
1.Tesla, Inc. (2023). Model 3 Texnik xususiyatlari. [Onlayn]. Mavjud: https://www.tesla.com/model3
Sh.A. Temirov., «Enhanced mechanical transmission drives agricultural machinery» “International Journal of Innavations in Engineering Resarsch and Technology – ISTC – 2K20” www.ijert.org. Vol. 29, No. 9s, (2020), pp. 5870-5875
2. Темиров, Ш. А., & Мирзаев, Н. Н. ИЗНОС РАБОЧИХ ПОВЕРХНОСТЕЙ ПОДШИПНИКА. 122й річниці заснування Національного університету біоресурсів і природокористування України, 236.
3. Kholmatov U. S. et al. Characteristics of optoelectronic discrete displacement converters with hollow and fiber light guides //E3S Web of Conferences. – EDP Sciences, 2024. – Т. 471. – С. 06015.
4. Melikuziev A. et al. IMPROVING THE PERFORMANCE OF THE FUEL INJECTION SYSTEM //Development and innovations in science. – 2022. – Т. 1. – №. 14. – С. 10-14.
5. Xalilbek o‘g‘li, X. E. (2023). MOTOR MOYLARIDA BO ‘LADIGAN O ‘ZGARISHLAR VA ULARNING XIZMAT QILISH DAVRI. Mexatronika va robototexnika: muammolar va rivojlantirish istiqbollari, 1(1), 321-323.
6. Karimovna M. D. et al. AGLOMERATSIYALAR SHAKLLANISHI //Лучшие интеллектуальные исследования. – 2023. – Т. 10. – №. 1. – С. 173-178.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in this journal are licensed under the Creative Commons Attribution 4.0 International License (CC-BY 4.0). Under this license:
- Share: Copy and redistribute the material in any medium or format
- Adapt: Remix, transform, and build upon the material for any purpose, including commercially
Attribution required: You must give appropriate credit, provide a link to the license, and indicate if changes were made.
License URL: https://creativecommons.org/licenses/by/4.0/
Authors retain copyright of their work while granting the journal first publication rights.
