TESTING THE STRENGTH LIMITS OF THE WORKING GROOVES OF ROLLING MILLS

Authors

  • Saydumarov B.M. Associate Professor, TSTU, Tashkent.
  • Rizaeva N.M. senior teacher TSTU, Tashkent.

DOI:

https://doi.org/10.37547/

Abstract

Inrollingmills, the worker is compressedduring the transitionbetween the grooves(the height of the cross-section of the rolled product decreases)andstretched(the length of the rolled product increases), while taking on therequiredshapeanddimensions. As aresult of thisdeformation, the metalstructureimproves. The workinghivesreceive the rollingforceandtransferit to thebearingsupports and clampingmechanisms of the bed of the workinghive. The basehiveshold the workinghivesandgivethem the necessaryrigidity.

Downloads

Download data is not yet available.

References

1. Saydumarov B.M. Rolling machines and equipment. The training manual. - Tashkent: TSTU. 2020y.

2. Berdiyev, D. M., & Saydumarov, B. M. (2021). Mathematical model of the cold rolling process. Scientific-technical journal, 3(6), 40-44.

3. Saydumarov B.M. Design of rolling equipment. Textbook. - Tashkent: TSTU. 2023y.

4. Berdiev, D. M., Umarova, M. A., Saydumarov, B. M., & Ibodullaev, T. N. (2023, January). Establishing the influence of structure parameters of steel on their abrasive wear resistance. In E3S Web of Conferences (Vol. 371, p. 01016).

Downloads

Published

2025-05-29

Issue

Vol. 5 No. 5 (2025): International Bulletin of Applied Science and Technology

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Articles published in this journal are licensed under the Creative Commons Attribution 4.0 International License (CC-BY 4.0). Under this license:

  • Share: Copy and redistribute the material in any medium or format
  • Adapt: Remix, transform, and build upon the material for any purpose, including commercially

Attribution required: You must give appropriate credit, provide a link to the license, and indicate if changes were made.

License URL: https://creativecommons.org/licenses/by/4.0/

Authors retain copyright of their work while granting the journal first publication rights.

How to Cite

TESTING THE STRENGTH LIMITS OF THE WORKING GROOVES OF ROLLING MILLS. (2025). International Bulletin of Applied Science and Technology, 5(5), 507-511. https://doi.org/10.37547/